Type 860 & 809 Standard Flange Globe Control Valve


The U.S. Type 860 globe control valve features a 1/2 in. (12.7 mm) body with 150 lb ANSI raised face flanges. It is designed to fit directly into pipelines of the same flange size and rating. Its compact size and light weight make it especially suited to modulating control of medium to low flow rates in the pressure range of 150 lb flanges. Its welded construction makes it readily available in a variety of materials. Other flange sizes and pressure ratings are available in the Type 809 valve assembly. Consult the factory for details.


The Type 860 and Type 809 valves are widely used in industrial applications where flanged type ends are desired to facilitate the removal of the unit from the line or to comply with specific piping standards. The compact design of the valve is especially attractive when flanged up to 3/4 in. (19.1 mm), 1 in. (25.4 mm), or 1-1/2 in. (38.1 mm) line sizes for controlling flow rates within the 1/2 in. (12.7 mm) valve size.




  • 1/2 in. (12.7 mm) models
  • Interchangeable trim sets
  • Class 150 raised face flanges
  • Trim characteristics: Linear, equal percent, quick open or
    double taper
  • TFE chevron packing
  • ANSI Class IV shutoff (size J trim and larger)
  • Threaded bonnet for quick disassembly


  • Special face-to-face dimensions
  • Oversized flanges
  • Ring type joint, tongue and groove, flat face or raised face
    smooth flanges
  • Bellows packing solutions
  • Reduced Emissions Kalrez® (REK), graphite, spring-loaded
    chevron and others
  • Bonnet extensions for temperature extremes
  • Angle pattern body
  • Exotic Alloys for complete valves or trims
  • Stellited trims & soft seats (PTFE & Kel-F)
  • TiN coating of inner valve stem and seat