- Available in sizes 1/2…24 in. (DN 15…600)
- Battery-powered, with a battery life of up to 20 years
- ± 0.4% of measured value ± 2 mm/s accuracy independent of fluid viscosity, density, and temperature
- Unaffected by most solids contained in fluids
- LCD Display
- Pulsed DC magnetic field for zero point stability
- No pressure loss for low operational costs
- Corrosion-resistant liners for long life
- Calibrated in state-of-the-art facilities
- Integral and remote signal converter availability
- Optional grounding rings or grounding electrode
- Measurement largely independent of the flow profile
- Low-power digital microcontroller (16-bit)
- Simple programming procedure
- Digital and infrared outputs
- Automatic zero-point stability
- Non-volatile programming
- NSF/ANSI/CAN 61 and 372, OIML, MID, and AWWA C715 certified
- Data logging
- Verification device
- IP67/IP68 protection class
- Modbus RTU (RS232), IRDA, M-Bus, optional Modbus RTU (RS 485)
- BEACON®/AquaCUE® connectivity
M5000 Electromagnetic Flowmeter
Designed, developed, and manufactured under strict quality standards, the M5000 electromagnetic flow meter features sophisticated, processor-based signal conversion with accuracies of ± 0.4%. Based on Faraday’s Law of Induction, these meters can measure potable water, reclaimed water, groundwater, and clear, water-based applications that have minimal electrical conductivity.
With no moving parts in the flow stream, there is no pressure loss. Also, accuracy is not affected by temperature, pressure, viscosity, or density and there is practically no maintenance required. It is encased in an IP67 housing (optional IP68), which makes it a reliable meter even when submerged.
- Water Distribution Networks: Accurate flow measurement in municipal systems.
- Remote Locations: Battery-powered for sites without permanent power.
- Irrigation: Flow monitoring in agricultural systems.
- Leak Detection: Detects leaks in water networks, including remote areas.
- Potable & Reclaimed Water: Designed for conductive water types.
- No-Power Applications: Continuous flow measurement with rate and totalization without a power line.
NOTE: Measurements in DN are for Nominal Diameter in mm.
