M2000 Electromagnetic Flowmeter

The Badger Meter ModMAG® M2000 is the result of years of research and field use of electromagnetic flow meter technology. Based on Faraday’s law of induction, these meters can measure water, wastewater, water-based fluids, and other liquids that meet minimum electrical conductivity.

Designed, developed, and manufactured under strict quality standards, this meter features sophisticated, processor-based signal conversion with accuracies of ±0.20% of rate ±1 mm/s. The wide selection of liner and electrode materials helps provide maximum compatibility and minimum maintenance over a long operating period.

The meter is best suited for bidirectional flow measurement of fluids with a conductivity > 5 µS/cm (> 20 µS/cm for demineralized water). The meter has high accuracy, is easy to use, and can be chosen for a wide variety of applications. The backlit, four-line display shows all actual flow measuring data, daily and complete information, including alarm messages. The standard transmitter has 4 programmable digital outputs, one digital input, a power output, and different interfaces. Integrated system self-checkup makes putting into operation and service easier. For service purposes, the meter configuration can be kept or transferred to another meter without a new parameter via the optional backup parameter function.


The M2000 transmitter can be integrally mounted to the sensor or can be remote-mounted, if necessary, and has many advantages over other conventional technologies. The meter targets a variety of applications and is well suited for the diverse water and wastewater treatment industry. The M2000 meter can accurately measure fluid flow—whether the fluid is water or a highly corrosive liquid, very viscous, contains a moderate amount of solids, or requires special handling. Today, electromagnetic meters are
successfully used in industries including building automation, oil and gas, food and beverage, pharmaceutical, water and wastewater, and chemical.



NOTE: Permanently connected equipment requires special considerations to satisfy the CEC and the Canadian deviations in the standard, including overcurrent and fault protection as required.

NOTE: DN represents nominal diameter in mm.


  • Available in sizes 0.25…78 in. (6…2000 mm)
  • Accuracy of ±0.2% of reading ±1 mm/s
  • Flow Range 0.03…12 m/s
  • Pulsed DC magnetic field for zero-point stability
  • Integral and remote signal converter availability
  • Power Supply of 100…240V AC / 9…36V DC
  • Corrosion-resistant liners for long life
  • Zero Straight Run (0 x DN) OIML/MID
  • User-friendly programming procedure
  • Empty pipe detection
  • Power loss totalization
  • Digital signal processor (32-bit)
  • Non-volatile programming memory
  • LCD display
  • Rotating cover
  • IP67 Housing
  • Calibrated in state-of-the-art facilities
  • Modbus® RTU or Modbus TCP/IP, HART, M-Bus, EtherNet/IP, BACnet/IP, BACnet MS/TP (BTL certification), Profibus DP
  • Integrated data logger
  • Verifications device
  • NSF/ANSI/CAN 61 and 372 listed
  • CSA / AWWA C715 certified
  • BEACON®/AquaCUE® connectivity