D-R 320

For continuous, contactless measurement of low to medium dust concentrations in dry flue and process gases. Also suitable for corrosive gases and potentially explosive atmospheres.

  • Principle: Backscattering of a red laser diode by dust particles
  • Installation: Single-sided, in-situ, contactless; easy setup on standard flanges (DN100/4″) without light traps or adjustments
  • Measurement: Continuous monitoring of small to medium dust concentrations (e.g., down to 0–7.5 mg/m³)
  • Automation: Automatic zero point, reference point, and contamination checks; integrated purge air monitoring
  • Reliability: Long service intervals; optional fail-safe shutter; compliant with EN 15267
  • Operation: Remote access possible; simple operation via optional units (D-ISC 100)
  • Incineration Plants: Monitoring emissions from municipal, hazardous, and sewage sludge waste incineration.
  • Power Plants: Used in gas, oil, coal, and co-firing power stations.
  • Cement Manufacturing: Dust monitoring in cement production facilities.
  • Biomass Incineration: Emission monitoring in biomass incineration plants.
  • Refineries & Steel Industry: Suitable for emission and process monitoring in steel plants and refineries.
  • Filter & Ventilation Units: Monitoring efficiency and detecting malfunctions in filtration and ventilation systems.
  • Measuring Principle: Backward scattering, single-sided, contactless
  • Measurement Range: 0–5 mg/m³ or 0–200 mg/m³
  • Light Source: Class II Laser (<1 mW @ 650 nm)
  • Gas Temperature: 0–600 °C (32–1112 °F)
  • Gas Pressure: –50 to +50 hPa (higher optional)
  • Accuracy: ±1%
  • Analog Output: 1× 4–20 mA (400 Ω)
  • Digital Outputs: 2 relay outputs
  • Communication: Modbus RTU
  • Installation: Single-sided on DN 100 PN6 or ANSI 4” flanges; no light trap needed
  • Check Functions: Automatic zero/reference, contamination correction, integrated purge air monitoring
  • Certifications: EN 14181, EN 15267-3, QAL1; optional EX approval Zone II
  • Power Supply: 24 VDC (~0.5A) for probe; separate supply for control unit
  • Weight: Approx. 12–15 kg (depending on variant)
Scroll to Top

Share your Requirement