carbo::lyser V3
The carbo::lyser is ideal for the measurement of the organic carbon load, represented by parameters like UV254, TOC, DOC, COD, or BOD, and at the same time, turbidity/solids concentration. Applicability ranges from pure water to industrial wastewater. Pre-calibrations for different types of water and applications significantly facilitate use.
carbo::lyser™ II monitors 2 of the following parameters: TSS, Turbidity, TOC, DOC, BOD, COD, COD f, UV254, and UV254 f
carbo::lyser™ III monitors 3 of the following parameters: TSS, Turbidity, TOC, DOC, BOD, COD, COD f, UV254, and UV254 f
- Measuring principle: UV-Vis spectrometry over the total range (190-750 nm)
- Webserver on board – IoT enabled, no user software is needed to configure the probe
- Communicates directly with your mobile device via WLAN
- Choose exactly the parameters you want to measure – an unlimited number of parameters possible
- 8 GB onboard memory – capacity for logging data for many years
- Improved optical performance – revolutionary precision
- Fast measurement interval – every 10 seconds
- Extremely power efficient – sleep mode for low energy consumption
- Multiparameter probe with 1 mm, 5 mm, or 35 mm optical path length, ideal for wastewater, surface water, and drinking water
- Long term stable and maintenance-free in operation
- Factory precalibrated, local multi-point calibration possible
- automatic cleaning with compressed air or brush/ruck::sack
- Environmental Monitoring: Track surface water and aquatic health by measuring organic pollutants and solids.
- Wastewater Treatment: Monitor influent, effluent, and processes for compliance and optimization.
- Drinking Water Treatment: Assess quality from raw sources to final treatment.
- Industrial Processes: Monitor effluent and processes for quality control and environmental management.
- Measuring Principle: UV-Vis Spectrometry (190-750 nm).
- Parameters: Measures organic carbon (TOC, COD, BOD), UV254, Turbidity, TSS, etc., depending on the specific configuration (carbo::lyser vs. multi::lyser).
- Optical Path Length: Available in 1mm, 5mm, or 35mm, suitable for various water types (wastewater, surface, drinking).
- Communication: Onboard Webserver, IoT-enabled, direct WLAN connection to mobile devices (no extra software needed).
- Data Logging: 8 GB onboard memory, capable of storing years of data.
- Measurement Interval: Fast intervals, e.g., every 10 or 30 seconds.
- Power: Very power efficient, with a sleep mode; typical consumption around 3W, sleep 60mW.
- Maintenance: Long-term stable, maintenance-free, with automatic cleaning (compressed air/brush) option.
- Installation: Submersible or in a flow cell, with operating pressure up to 3 bar (optional high-pressure up to 10 bar).
- Calibration: Factory pre-calibrated, with local multi-point calibration possible
