Search Results

M4000 Electromagnetic Flow Meter
By Pragya Gupta

M4000 Electromagnetic Flowmeter

The innovative design of the Badger Meter® ModMAG® M4000 meter represents the next generation of electromagnetic flow meter technology. Incorporating the latest developments in microprocessing signal conditioning, the advanced design of the M4000 meter allows an accuracy of ± 0.20% with a flow range of 300:1. Targeted to a variety of oil and gas, industrial and municipal applications, the M4000 meter is virtually unaffected by density, temperature, pressure, and viscosity changes and provides an
accurate and reliable long term metering solution. This meter complies with ANSI/NSF Standard 61, Annex G.

APPLICATION

The M4000 meter is suited for use in applications where the indication of rate and totalization is required. The ability to display flow parameters locally at the flow meter, or remotely by mounting the amplifier up to 100 feet away from the detector, provides a versatile solution for most industrial and municipal flow applications. Whether the fluid is water or something highly corrosive, very viscous, contains a moderate amount of solids, or requires special handling, the meter is able to accurately measure it. Housed in Class 1, Division 1, NEMA 4X (IP66) enclosure, the M4000 design has been tested and approved by Factory Mutual (FM) in the United States and the Canadian Standards Association (CSA international) in Canada.

FEATURES

• Sizes 1/4…12 in. (6…300 mm)
• Accuracy of ± 0.20%
• Better than 0.1% repeatability
• Digital Signal Processor (DSP) based
• Automatic zero-point stability
• No pressure loss for low operational costs
• Long life, corrosion-resistant liners
• Precise calibration
• Digital and analog outputs
• Detector or remote wall mount
• NEMA 4X (IP66) enclosure
• FM approved for Class I, Div 1 hazardous location
• CE and FCC compliant
• CSA Certified

Exact Dual Rotor Turbine Flow Meter
By Pragya Gupta

Exact Dual Rotor Turbine Flowmeter

The Cox Exact Dual Rotor Turbine Flow Meter is the pinnacle of turbine meter technology that delivers results not attainable with single rotor designs. The Exact meter’s hydraulically coupled helical dual rotor design provides exceptional performance and many unparalleled benefits. The dual rotor design extends the flow measurement range, due to the high incidence angle on the second rotor, resulting in turndowns of 120:1 on the smallest meter to 500:1 on larger meters. This exceptional flow range allows universal viscosity curves to blend over a 60:1 turndown range. This wide flow range often eliminates the need for more costly manifold systems.

Swirl effects on the leading rotor will have an opposite effect on the trailing rotor. Therefore, by summing (or averaging) both rotors, it will virtually cancel out rotor acceleration, eliminating the need for flow straighteners. With flow straighteners, the ratio of the two rotors can be monitored to determine bearing health. Reduced friction ceramic ball bearings, combined with a unique embedded pickoff system, impervious to vibration, make the Exact Dual Rotor design ideal for onboard vehicles, flight, and critical applications.

APPLICATIONS

• OEM flight and hydraulic component testing
• Precision industrial blending processes
• Engine test cells and test stands
• Precision flow monitoring
• On-board aerospace and automotive testing
• Custody transfer
• Correlation standards
• Flow Transfer Standard Master Meter
• Custom flight or industrial OEM packaging

B142 Gas QuikSert® Turbine Flow Meter
By Pragya Gupta

B142 Gas QuikSert® Turbine Flowmeter

The Gas QuikSert turbine flow meter provides a long service life by offering a durable construction design composed of stainless steel and tungsten carbide shaft and bearings. The unique wafer-style design allows for quick installation and easily fits between two flanges. Gas QuikSert is fully compatible with all Blancett flow monitors, K-factor scalers, and intelligent converters. The Gas QuikSert is compatible with most instruments, PLCs, and computers.

FEATURES AND BENEFITS

• Consistent, reliable gas flow measurement.
• Wafer mounting configuration for limited space requirements.
• Lightweight, balanced rotor provides instantaneous response to changes in flow.
• No mating flange design allows for a quick and easy installation.
• Superior material of construction for high performance in aggressive environments.

900 Series Flow Meter
By Pragya Gupta

900 Series Flowmeter

Blancett 900 Series positive displacement flow meters are designed specifically for the measurement of floodwater line flow in secondary oil recovery operations. Using a time-proven rotary vane mechanism, the 900 Series flow meters provide reliable long-term measurement and totalization with minimum attention and maintenance.

FEATURES

• Interchangeable inlet inserts with three different-sized orifices
• Pre-calibrated orifices for specific low, medium, and high meter flow ranges
• Vaned impeller operates at pressures up to 5000 psi
• Two end connections: 2 in. NPT (male) and 1 in. NPT (female)

QuikSert® In-Line Turbine Flow Meter
By Pragya Gupta

QuikSert® In-Line Turbine Flowmeter

The QuikSert in-line turbine flow meter was developed for liquid applications where accuracy and dependability are needed. QuikSert’s stainless steel body incorporates a helical turbine with a tungsten carbide shaft and bearing. It provides an efficient, long service life and a cost-effective solution for your measurement requirements.

Simple in design and construction, QuikSert uses modified upstream and downstream flow straighteners for a high degree of flow accuracy. Its between-the-flange design eliminates the need for mating flanges, requiring less space in the flow line, lowering costs for easy, one-man installation.

The meter produces a sine-wave signal proportional to its volumetric flow rate. With optional Blancett electronics, QuikSertprovides local flow rate and volume totalization and interfaces with most instruments, PLCs, and computers.

FEATURES

  • Accurate and repeatable flow measurement from 0.6…3 gpm (20…100 bpd) to 500…5000 gpm (17,000…171,000 bpd).
  • The unique between-the-flange design eliminates the need for mating flanges.
  • Superior materials of construction for high performance in aggressive environments.
  • Wafer-style mounting configurations for limited space requirements.
  • Modified flow straighteners for enhanced fluid dynamics.
Model 1100 Turbine Flow Meter
By Pragya Gupta

Model 1100 Turbine Flowmeter

The Model 1100 turbine flow meter is designed to withstand the demands of the most rigorous flow measurement applications. Originally developed for the secondary oil recovery market, the Model 1100 flow meter is an ideal meter for liquid flow measurement on or off the oil field.

The meter features a rugged 316 stainless steel housing and rotor support assemblies, CD4MCU stainless steel rotor, and abrasive-resistant tungsten carbide rotor shaft and journal bearings. The Model 1100 maintains measurement accuracy and mechanical integrity in the corrosive and abrasive fluids commonly found in oil field water flood projects and many industrial applications.

When paired with a Blancett flow monitor, the Model 1100 turbine meter meets a wide range of measurement requirements. This makes it ideal for applications such as pipelines, production/injection fields, in-situ mining operations, offshore facilities, and other industrial applications. For a full list of Blancett flow monitors, see www.badgermeter.com.

FEATURES

  • Offers accurate and repeatable flow measurement in ranges from 0.6…5000 gmp (20…171,000 bpd)
  • Cost-effective solution for turbine flow meter applications
  • Rugged 316 stainless steel construction offers a long service life in severe operating environments
  • Available in NPT, BSP, Victaulic®, flange, or hose barbed end connections
  • NIST traceable calibration
  • Installation in pipe sizes from 1/2…10 in. Can integrate electronically with a Blancett flow monitor
  • K-factor Scaler, or the F to I/F to V Intelligent Converter Field replaceable repair kits allow for turbine replacement without
    loss of accuracy
Flow assembly autobrush – for spectro::lyser™ path length 35mm
By Pragya Gupta

Flow assembly autobrush – for spectro::lyser™ path length 35mm

  • For easy and correct bypass installation of s::can spectrometer probes
  • For applications with periodic, automatic cleaning
  • Cleaning of the measurement window using a rotating brush without dismantling the spectrometer probe

Technical data

  • Power supply: 12 VDC
  • Housing material: POM-C
  • Dimensions (width x height x depth): 74 x 132 x 153 mm
  • Weight (min.): 1 kg
  • Process connection: G 1/2″, hose nozzle 12mm
  • Installation/assembly: flow fitting
  • Application area Temperature: 0 … 40 °C
    Pressure range: 0 … 6 bar
  • Protection class: IP 66
  • Article number: F-446-1
Path length 100 mm Flow assembly autobrush – for spectro::lyser™ path length 100 mm
By Pragya Gupta

Path length 100 mm Flow assembly autobrush – for spectro::lyser™ path length 100 mm

  • For easy and correct bypass installation of s::can spectrometer probes
  • For applications with periodic, automatic cleaning
  • Cleaning of the measurement window using a rotating brush without dismantling the spectrometer probe

Technical data

  • Power supply: 12 VDC
  • Assembly: ex works
  • Housing material: POM-C
  • Dimensions (WxHxD): 74 x 196 x 153 mm
  • Weight (min.): 1.7 kg
  • Process connection: G 1/4″
  • Installation/assembly: Flow-through
  • Fitting Temperature range: 0 … 40 °C
  • Application pressure: 0 … 6 bar
  • Protection class: IP 66
  • Article number: F-446-2
Flow fitting for i::scan (waste water)
By Pragya Gupta

Flow fitting for i::scan (waste water)

  • For easy and proper installation of an i::scan in wastewater applications

Technical data

  • Housing material: PVC
  • Dimensions (WxHxD): 177 x 83 x 90 mm
  • Process connection: 1″ internal thread
  • Installation/assembly: flow fitting
  • Recommended flow rate: < 40 l/min
  • Article number: F-48-i::scan
Pressure connection set spectro::lyser and s::can sensors
By Pragya Gupta

Pressure connection set spectro::lyser and s::can sensors

  • Simple and proper supply of cleaning air
  • Compatible with s::can installation fittings

Technical specification

  • Cable length: 3 m
  • Assembly: ex works
  • Housing material: PU sheath, connection sleeve in brass, nickel-plated (for spectrometer probes: fitting PP)
  • Process connection: 3/8”
  • Pressure range: 1 … 6 bar
  • Item numbers: B-41-sensor (for ammo::lyser™, oxi::lyser™ and soli::lyser)
  • B-41-Spectro (for s::can spectrometer probes)