- Dual Mode Functionality: Measures both static (resting) and drawdown (pumping test) water levels.
- Durable Tape: White polyethylene-coated steel with Kevlar reinforcement; dog-bone profile prevents sticking and stretching.
- Clear Indicators: Audio buzzer and LED light signal water contact instantly.
- Adjustable Sensitivity: Dial filters false signals from cascading or turbulent water.
- Robust Probe: Stainless steel, fully sealed, pressure-tested; can be submerged to well bottom.
- Field-Ready Design: Integrated well hanger, ergonomic handle, and brake knob for secure operation.
- Safety Features: Shear-pin safety link protects tape and probe from getting stuck.
- Easy Maintenance: Removable sealed electronics module; field-replaceable probes.
- Accurate Readings: Metric or imperial units with precise millimeter/0.01-foot graduations.
Water Level Meter 100
This economical water-level tape, with Kevlar-reinforced polyethylene tape and stainless steel conductors, offers long-lasting performance for well drillers, pump installers, and other service users. The Water Level Meter 100 can take static level readings and then switch to drawdown mode to perform low-flow and pump tests. Additionally, the IP68-rated probe can be submerged in depths of up to 300 m (1,000 ft) to determine the bottom of the well.
A corrosion-resistant probe and protected electronics prevent wear and tear. An integrated well hangar and roller bar protect the tape and speed deployment. And high-strength tape reduces stretching, ensuring accurate readings over the lifetime of the meter.Available in feet or meters, the flexible tape winds smoothly onto the reel and does not stick to wet surfaces and well casings.
- Depth-to-Water Measurements: Quickly measure static water levels in wells, piezometers, and boreholes.
- Low-Flow Sampling: Drawdown mode supports purging for representative environmental sampling.
- Pump & Slug Tests: Track water level changes during aquifer tests to evaluate hydraulic properties.
- Dewatering Operations: Monitor lowering water levels during construction or mining projects.
- Well Construction & Installation: Verify depths and settings for drilled wells and pump installations.
- Probe Specifications
- Diameter: 16 mm (0.625 in)
- Length: 13.5 cm (5.3 in)
- Weight: 87 g (3.1 oz)
- Environmental Rating: IP68 (fully submersible)
- Pressure Rating: Up to 500 psi (300 m / 1000 ft depth)
- Wetted Materials: Stainless Steel, Delrin
- Safety Feature: Security link (34 kg / 75 lb) releases probe if stuck
- Tape & Reel Specifications
- Tape Construction: Kevlar-reinforced polyethylene
- Tape Markings: Feet & tenths or meters & centimeters, resolution 1 mm (0.01 ft)
- Tape Strength: High-strength, resists stretching for accuracy
- Reel Options: Small, Medium, Large; lengths up to 600 m (2000 ft)
- Reel Features: Integrated well hanger, roller bar, adjustable brake
- Indicators & Power
- Signals: LED lights and buzzer
- Modes: Static & Drawdown (for pump tests)
- Sensitivity: Variable dial to filter cascading water
- Power: 9V alkaline battery, easy to change
- Activation: Automatic when probe contacts water (no separate switch)
