Description
Specifications
LaserFlow® Non-contact Velocity Sensor
| Dimensions (HxWxD): | 14.96 x 10.3 x 22.32 in (38.01 x 26.21 x 56.7 cm) |
|---|---|
| Laser Class: | Class 3R |
| Temperature Range: | Operating: -20 to 60° C (-4 to 140° F) |
| Storage: -40 to 60° C (-40 to 140° F) | |
| Flow Accuracy: | Accuracy @ 22° C |
| ±0.006m (0.02 ft) at < 1 ft level change | |
| ± 0.012m (0.04 ft) at > 1 ft level change | |
| Power Required: | Input voltage: 8 to 26V DC |
| 12V DC Nominal |
System Vversatility
From industrial applications to manhole installations, the LaserFlow offers versatile configuration options to give you the flexibility to measure flow in most open-channel applications. The sensor is compatible with both the Signature flowmeter for permanent discharge compliance monitoring and the 2160 module for everything from portable surveys to permanent installations. Both flowmeters have a variety of communication options for remote data access and programming, eliminating the need for frequent site visits.
Single or Multiple Point Measurement
Depending on your application needs, the LaserFlow device can be programmed to take velocity measurements at single or multiple points below the water’s surface, producing an accurate mean velocity reading.
Remote Ultrasonic Option
In applications where the level measurement point of the built-in ultrasonic and the measurement point of the laser velocity are of different elevations, such as a freefalling outfall or drop manhole, the remote ultrasonic option can be used so that both measurement points reference the same elevation.
Due to unique site requirements, various mounting hardware is available for use with the LaserFlow sensor and 310 remote ultrasonic sensor.
Optional Submerged Functionality
During submerged conditions, when water reaches the LaserFlow, the optional bottom-mounted TIENet™ 350 Area Velocity sensor seamlessly takes over the flow rate measurement. The sensor provides ultrasonic Doppler velocity measurement and Differential Pressure level measurement. This option measures flow in the pipe/channel. By measuring velocity over a large area, ultrasonic Doppler technology provides more accurate flow measurement during submerged conditions.
Optional Redundant Measurement
For redundant flow measurement at critical monitoring sites, a unique flexibility is added by the optional 350 sensors when mounted at the bottom of the pipe. This sensor provides redundant velocity, level, and flow data from the same site as the LaserFlow device.
Easy and Secure Retrieval/Replacement Without Manhole Entry
Following initial installation and adjustment, the sensor can be installed or removed as needed without manhole entry in most situations, using the optional sensor retrieval arm to grasp the handle.
The handle’s simple yet effective locking mechanism holds the sensor securely in place and is easy to engage and release from above ground.
Standard Features
- Non-contact velocity and level measurement
- Single or Multiple Point measurement below the liquid surface
- Rugged, submersible enclosure with IP68 ingress protection
- Zero deadband from measurement point in non-contact level and velocity measurements
- Quality readings without manual profiling
- Bidirectional velocity measurement
- MCERTS Class 2
Applications
- Permanent and portable flow measurement for CSO, SSO, I&I, SSEs, CMOM, and other sewer monitoring programs
- Shallow flow measurement in varying pipe sizes
- Wastewater treatment plant influent, process, and effluent flow measurement
- Industrial process and discharge flow measurement
- Stormwater conveyance and outfall
- Irrigation canals and channels
Options and Accessories
- Flow measurement during submerged conditions via Ultrasonic Doppler technology
- Redundant flow measurement with simultaneous Continuous Wave Doppler or Ultrasonic Level Sensing
- Permanent and temporary mounting hardware
- Sensor retrieval arm enables installation and removal without confined space entry
- Remote ultrasonic level sensor options for drop manhole and outfall applications
